Home Services Products Payment&Delivery Contact where to buy FAQ HIFI SPECIALS

 

 

audiiolab M-dac

 

 

ah_mdac5

 

ah_mdac3

 

The M-DAC, an eagerly awaited, new standalone D/A converter finally makes its debut as a replacement for the award-winning 8000DAC introduced in 1992.

       The M-DAC is housed in a smart styling aluminium case with solid build and ample connectivity. Alongside the USB input with Asynchronous data processing, there are two each of coaxial and optical digital inputs, and one each of coaxial and optical digital outputs. Audio signal is provided via RCA single-ended and XLR balanced audio outputs.

       A wand like remote control handset allows you to switch inputs, select from preset digital filters and alter the display. The large clear screen allows you to see what input is being used and the sample rate being received. High-res 24-bit/192kHz music files can be played on the M-DAC via the coaxial input, while optical and USB inputs support 24-bit/96kHz data.

Specification

Model M-DAC
General description Digital-to-analogue converter
DAC ESS Sabre32 9018 chip
Resolution 32 bits
Maximum Sampling Frequency 84.672MHz
Digital input 2 x 24-bit/192kHz coaxial ,2 x 24-bit/96kHz Toslink optical, 1 x 24-bit/96kHz USB
Digital output 1 x coaxial, 1x Toslink optical
Output voltage RCA: 2.25V RMS,XLR: 4.5V RMS
Total Harmonic Distortion RCA: <0.002%; XLR: <0.0008%
Frequency response 20Hz - 20kHz (± 0.2dB)
Dynamic range RCA: >115dB;XLR: >122dB
Crosstalk RCA: <-120dB;  XLR: <-130dB
Dimensions (H x W x D) 59 x 250 x252mm
Power requirements (depending on region) 220--230V /100-120V (50 ~ 60Hz)
Colour Black, Silver
Standard accessories power cord, remote control handset, batteries, user manual

 

Features

• Asynchronous USB supporting 24-bit/96kHz with remote control of PC / MAC Media Player via HID support
• High current, high linearity RCA single-ended & XLR true balanced with fully discrete J-FET CROSS* Class A output stages and built-in headphone amplifier
• Selectable DAC mode or Digital Pre-amplifier mode, allowing direct connection to power amplifiers and active speakers in digital only systems
• 2.7” high contrast OLED display
• "Actual"or"Nominal"Sampling Frequency display – displays the TRUE input sampling frequency with 1Hz resolution
• Digital level meters in dB with peak hold
• CD / DVD SPDIF subcode embedded Track and Time Display
• Advanced de-jittered optical and coaxial SPDIF output, with USB to SPDIF output.
• Full remote control + external remote / BUS I/O loop
• 26 internal regulated supply rails with 10 ultra low noise, low impedance discrete regulators
• 7 user selectable digital filters – fully software upgradeable via the USB port
• Organic ultra low ESR capacitors, high tolerance polypropylene film / foil capacitors, ultra stable very low VCR 0.1% MELF SMD resistors, 4 layer PCB
• External upgradeable power supply interface for a future upgrade path

 

 

RRP $1099.00 INC GST AND DELIVERY