Home Services Products Payment&Delivery Contact where to buy FAQ HIFI SPECIALS

 

 

U-05 pioneer

U-05 Headphone Amplifier

u-05_front_pioneer

 

u-05-pioneer back

 

Headphone amplifier with D/A Converter for easy and accurate reproduction of music files from PC via USB

It has finally arrived.

For the true audiophile, we have developed our first discrete headphones amplifier with USB-DAC. Supporting almost any connection type, from a traditional standard jack to 3- and even 4-pin NEUTRIK jacks, you can customise your cables as you please. Whatever headphone cable you prefer, the U-05 always guarantees high-grade audio thanks to its fully balanced circuit. Advanced tuning possibilities allow even more dramatic sound improvement.

Audio Features

D/A Converter Features

  • 8ch Parallel Drive with SABRE32 Ultra DAC (ES 9016S x 2)
  • USB Input (PCM): 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz (16, 24, 32 bit)
  • USB Input (DSD): 2.8 MHz, 5.6 MHz
  • COAXIAL/OPTICAL/AES /EBU Input: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (16, 24 bit)
  • Minimum Jitter with Asynchronous Transfer
  • Digital Filter with 3 Modes (SHARP/SLOW/SHORT)
  • Lock Range Adjust Function for Reducing Jitter by Adjusting. Lock Range Accuracy
  • DIRECT Mode for Faithful Reproduction of Original Sound
  • Audio Scaler for up to 384 kHz/32-bit Upsampling

Headphone Amplifier Features

  • Shielded Power Transformer with Independent Winding, Isolated Power and Digital/Analogue Blocks
  • Full Balance Circuit for Minimum Noise
  • Discreet Circuit Adopted for High-Quality Sound Tuning
  • Balanced Headphone Terminal (XLR3/XLR4) x 2 Compatible with Recabled Headphones, Unbalanced Headphone Terminal (STD) x 1
  • Fine Adjust Volume Control
  • Gain Switch for Using Headphones with Different Impedance

Audio Performance and Various Other Features

  • Digital Isolator for Reducing USB Block Noise/li>
  • Highly Renowned NEUTR IK Balance Terminals and Machined RCA Terminals
  • High-Grade Parts Including Pioneer Custom Power Capacitor
  • Variable/Fix Volume Selectable Analogue Output (XLR3/RCA) for Pre-Amp Function
  • Phase Switch Feature for Line Output
  • Low Centre of Gravity Design with Heavy and Robust Chassis
  • Screw-less Flat Design with Aluminium Front, Top, and Side Panels
  • Dedicated Remote for Volume and Tone Control
  • Front Display for Detailed Source Information
  • Auto Power Down

Connections

Front Terminals

  • Phones Outputs: Unbalanced (ST D) x 1, Balanced __ (XLR3) x 1, Balanced (XLR4) x 1
  • Max Output: Unbalanced (STD): 180 mW + 180 mW (32 ohms), Balanced (XLR3/XLR4): 300 mW + 300 mW (32 ohms)
  • Opt Load Impedance: 16 -600 ohms
  • Frequency Response: 4 Hz-80 kHz (-3.0 dB)
  • THD + N (Output Power -3 dB): Unbalanced (STD) 0.01 %, Balanced (XLR3/XLR4) 0.004 %
  • S/N Ratio (A-Weight): Unbalanced (STD): 106 dB, Balanced (XLR3/XLR4): 113 dB

Rear Terminals

  • Digital Inputs: US B (type B) x 1, Coaxial x 2, Optical x 2, AES/EBU (XLR3) x 1
  • Analogue Outputs: Unbalanced (RCA) x 1, Balanced (XLR3) x 1 (with Output Level Fix/Variable Switch and Phase Switch)
  • Output Voltage/Impedance: Unbalanced (RCA) 2.4 V/100 ohms, Balanced (XLR3) 4.4 V/100 ohms
  • Frequency Response: 4 Hz-100 kHz (-3.0 dB)
  • THD + N: Unbalanced (RCA) 0.0012 %, Balanced (XLR3) 0.0007 %
  • S/N Ratio (A-weight): Unbalanced (RCA): 114 dB, Balanced (XLR3): 117 dB
  • Dynamic Range: 16 bit: 96 dB, 24 bit, 32 bit: 118 dB

Dimensions & Weight

Dimensions (W x H x D): 296 x 101 x 271 mm Weight: 6.3 kg

 

rrp $1299.00 inc gst ,  plus delivery